B.1. XFree86

B.1.1. 1st XFree server configuration file


# File generated by XFdrake.

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************

Section "Files"

    RgbPath	"/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.


EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

    # Uncomment this to cause a core dump at the spot where a signal is
    # received.  This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    #NoTrapSignals

    # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    #DontZap

    # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
    # sequences.  This allows clients to receive these key events.
    #DontZoom

    # This  allows  the  server  to start up even if the
    # mouse device can't be opened/initialised.
    AllowMouseOpenFail

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Keyboard section
# **********************************************************************

Section "InputDevice"

    Identifier "Keyboard1"
    Driver      "Keyboard"
    Option "AutoRepeat"  "250 30"

    Option "XkbRules" "xfree86"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "de(nodeadkeys)"

EndSection

# **********************************************************************
# Pointer section
# **********************************************************************

Section "InputDevice"

    Identifier  "Mouse1"
    Driver      "mouse"
    Option "Protocol"    "IMPS/2"
#    Option "Device"      "/dev/psaux"
    Option "Device"      "/dev/input/mouse1"
    Option "ZAxisMapping" "4 5"

# ChordMiddle is an option for some 3-button Logitech mice
    Option "Emulate3Buttons"
#    Option "ChordMiddle"

EndSection



Section "Module"

# This loads the DBE extension module.
    Load	"dbe"
    Load	"GLcore"
#    Load	"dga"
    Load	"glx"
    Load	"extmod"
    Load	"dri"
# pass two from mga mailing-lists
#    Load	"pex5"
#    Load	"xie"
    Load	"bitmap"
    Load	"record"
    Load	"vbe"
    Load	"int10"
# end pass two mga mailing-lists


# This loads the Video for Linux module.
    Load        "v4l"


# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.

    SubSection	"extmod"
	#Option	"omit xfree86-dga"
    EndSubSection

# This loads the Type1 and FreeType font modules

    Load	"type1"
    Load	"freetype"
EndSection

Section "DRI"
    Mode	0666
EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"
    Identifier "Generic|Monitor that can do 1600x1200 at 70 Hz"
    VendorName "Unknown"
    ModelName  "Unknown"


# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
    HorizSync  30-98


# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
    VertRefresh 50-160


# This is a set of extended mode timings typically used for laptop,
# TV fullscreen mode or DVD fullscreen output.
# These are available along with standard mode timings.

# Sony Vaio C1(X,XS,VE,VN)?
# 1024x480 @ 85.6 Hz, 48 kHz hsync
ModeLine "1024x480"    65.00 1024 1032 1176 1344   480  488  494  563 -hsync -vsync

# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576"     50.00  768  832  846 1000   576  590  595  630
# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576"     63.07  768  800  960 1024   576  578  590  616


EndSection


Section "Monitor"
    Identifier "monitor2"
    VendorName "Unknown"
    ModelName  "Unknown"

    HorizSync   30-98
    VertRefresh 50-160
EndSection


Section "Monitor"
    Identifier "monitor3"
    VendorName "Unknown"
    ModelName  "Unknown"

    HorizSync   31.5-60.0
    VertRefresh 56.0-75.0
EndSection



# **********************************************************************
# Graphics device section
# **********************************************************************

Section "Device"
    Identifier "Generic VGA"
    Driver     "vga"
EndSection


Section "Device"
    Identifier  "g550_1"
    VendorName  ""
    BoardName   ""
    Driver      "mga"
    # Clock lines


    # Uncomment following option if you see a big white block        
    # instead of the cursor!
    #    Option      "sw_cursor"
    Option	"AGPMode" "4"
#    Option      "HWCursor" "Off"
    Option      "HWCursor" "On"
    Option	"MGASDRAM" "On"
    Option      "DPMS"  "Off"
    # Screen 0
    BusID       "PCI:1:0:0"
EndSection


Section "Device"
    Identifier  "g550_2"
    VendorName  ""
    BoardName   ""
    Driver      "mga"
    # Clock lines


    # Uncomment following option if you see a big white block        
    # instead of the cursor!
    #    Option      "sw_cursor"
    Option	"AGPMode" "4"
    Option	"MGASDRAM" "On"
#    Option      "HWCursor" "Off"
    Option      "HWCursor" "On"
    Option      "DPMS"  "Off"
    # Screen 1
    BusID       "PCI:1:0:0"
EndSection



# **********************************************************************
# Screen sections
# **********************************************************************

Section "Screen"
    Identifier "screen1"
    Device      "g550_1"
    Monitor     "monitor2"
    DefaultColorDepth 16
    Subsection "Display"
        Depth       8
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       15
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
EndSection


Section "ServerLayout"
    Identifier "layout1"
    Screen     "screen1"
    Option      "SingleCard" "true"

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
EndSection
        

B.1.2. 2nd XFree server configuration file


# File generated by XFdrake.

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************

Section "Files"

    RgbPath	"/usr/X11R6/lib/X11/rgb"
    ModulePath  "/usr/X11R6/libNV/modules"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.


EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

    # Uncomment this to cause a core dump at the spot where a signal is
    # received.  This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    #NoTrapSignals

    # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    #DontZap

    # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
    # sequences.  This allows clients to receive these key events.
    #DontZoom

    # This  allows  the  server  to start up even if the
    # mouse device can't be opened/initialised.
    AllowMouseOpenFail

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Keyboard section
# **********************************************************************

Section "InputDevice"

    Identifier "Keyboard1"
    Driver      "Keyboard"
    Option "AutoRepeat"  "250 30"

    Option "XkbRules" "xfree86"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "de(nodeadkeys)"

EndSection

# **********************************************************************
# Pointer section
# **********************************************************************

Section "InputDevice"

    Identifier  "Mouse1"
    Driver      "mouse"
    Option "Protocol"    "PS/2"
    Option "Device"      "/dev/input/mouse0"
    Option "Emulate3Buttons"
#    Option "ZAxisMapping" "4 5"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection


Section "Module"

# This loads the DBE extension module.
    Load	"dbe"
    Load	"glx"
    Load	"vbe"
    Load	"int10"

# This loads the Video for Linux module.
#    Load        "v4l"


# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.

    SubSection	"extmod"
	#Option	"omit xfree86-dga"
    EndSubSection

# This loads the Type1 and FreeType font modules

    Load	"type1"
    Load	"freetype"
EndSection

#Section "DRI"
#    Mode	0666
#EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"
    Identifier "Generic|Monitor that can do 1600x1200 at 70 Hz"
    VendorName "Unknown"
    ModelName  "Unknown"


# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
    HorizSync  30-98


# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
    VertRefresh 50-160


# This is a set of extended mode timings typically used for laptop,
# TV fullscreen mode or DVD fullscreen output.
# These are available along with standard mode timings.

# Sony Vaio C1(X,XS,VE,VN)?
# 1024x480 @ 85.6 Hz, 48 kHz hsync
ModeLine "1024x480"    65.00 1024 1032 1176 1344   480  488  494  563 -hsync -vsync

# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576"     50.00  768  832  846 1000   576  590  595  630
# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576"     63.07  768  800  960 1024   576  578  590  616


EndSection


Section "Monitor"
    Identifier "monitor2"
    VendorName "Unknown"
    ModelName  "Unknown"

#    HorizSync   30-98
#    VertRefresh 50-160

    HorizSync   30-50
    VertRefresh 50-120
EndSection



# **********************************************************************
# Graphics device section
# **********************************************************************

Section "Device"
    Identifier "Generic VGA"
    Driver     "vga"
EndSection

Section "Device"
    Identifier  "nv"
    VendorName  ""
    BoardName   ""
    Driver      "nvidia"
    # Clock lines


    # Uncomment following option if you see a big white block
    # instead of the cursor!
    #    Option      "sw_cursor"
    Option	"UseInt10Module" "off"
    Option	"ConnectedMonitor" "CRT"
    Option	"IgnoreEDID" "off"
    Option	"HWCursor" "on"

    Option      "DPMS"  "Off"
    Option	"NoLogo" "On"
    BusID       "PCI:0:10:0"
EndSection


# **********************************************************************
# Screen sections
# **********************************************************************

Section "Screen"
    Identifier "screen1"
    Device      "nv"
    Monitor     "monitor2"
    DefaultColorDepth 24
    Subsection "Display"
        Depth       8
        Modes       "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       15
        Modes       "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       32
        Modes       "1280x1024" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
EndSection


Section "ServerLayout"
    Identifier "layout1"
    Screen     "screen1"
    Option      "SingleCard" "true"

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection